



The method used to lay floor screeds on concrete is to first hack the concrete to remove laitance or the smooth like cement substance appearing.Once this is done a key is formed to ensure proper bonding of the new floor and concrete.The next thing is to wet the floor to prevent competition of absorption of water between the slab and screed.Pour cement slurry and rub it in to the slab to create a bonding agent between the two elements.
Mark levels for the floor screed either to give it falls or to run smooth on the concrete slab.Pour the cement sand mix and spread evenly with a rake and pound with a rammer to give a hard surface.Level out the excess mortar with a wood float until the surface has reached the required level.Remember also whether another finish will be added either wood parquet or PVC tiles.This will ensure the screed is finished rough with a wood float or skimming coat.
A skimming coat is a mix of cement and water applied with a steel float to make it smooth.It is applied as final floor finish or when using PVC, wood blocks or any timber finishes while for ceramic tiles its done rough with a wood float.After noting the finish intended on the floor ,its then done and left to dry curing continuously by wetting for about a week.When completely dry its cleaned or the next finish like parquet added to another finish.
Andrew Karundu Is A Building Economist, Providing Home Based Solutions To Fixing, Repairing, Remodeling And Redesigning Homes. He Uses Simple Tried And Tested Methods To Improve Family Lifestyles.Visit His Site Here For Adequate Information On Most HOME IMPROVEMENT SOLUTIONS.
Possibly Related Posts:


More Options ...
Categories
Tag Cloud
Blog RSS
Comments RSS



Void « Default
Life
Earth
Wind
Water
Fire
Light 