



The finish fixed on the floor and masonry is a timber skirting. This skirting is about three inches wide and one inch thick. It has a rebate at the top. This rebate is for anchorage and nailing into the concrete. Hardwood timber is used due to its durability. It should cover the masonry about two and a half inches on the face side. If looked at on elevation, it seems like a skirting placed on top of the wall. On the floor part, it should be about a done a quarter inch above the surface. This is to one avoid tripping on skirting end.
Since the two courses of masonry are a feature wall, the aesthetics must be kept. The rebated timber skirting should not distort that beauty. The cover piece can be painted to match the feature wall or made to compliment it. In the interior design of a house, aesthetics are an integral part of finishes to any two different materials bonded together. Therefore the skirting piece at the part it lies on the floor should mat the timber finish. Preferably the same floor varnish used should be applied on it.
When fixing the cover on the floor finish, first measure the length required. The size of the rebate should be measured to spread on to the floor by about an inch. The thickness of this part can be about an eighth to half an inch thick. Screws are used to fasten it onto the concrete below the timber floor. Fine saw dust mixed with wood glue is run over the screw heads. This is sanded and rubbed down till smooth. The skirting, when fixed should lie firmly onto the feature wall. Decoration is then applied to match the floor and wall or as desired.
Andrew Karundu Is A Building Economist, Providing Home Based Solutions To Fixing, Repairing, Remodeling And Redesigning Homes. He Uses Simple Tried And Tested Methods To Improve Family Lifestyles.Visit His Site Here For Adequate Information On Most HOME IMPROVEMENT SOLUTIONS.
Possibly Related Posts:


More Options ...
Categories
Tag Cloud
Blog RSS
Comments RSS



Void « Default
Life
Earth
Wind
Water
Fire
Light 