



Mesh gabions on sloppy gardens uses hardcore or stone rubble as the composite material inside. The mesh is formed into a box. This spans along the length of the slope. The material used is chain link or hexagonal mesh. When forming the stepped garden, a fair distance of about twenty feet wide is taken per level. The gabion is then placed first at twenty feet position. Next the soil is leveled flush with the top. The process may involve mechanical plants for moving the huge volumes of soil if the land is too steep.
Gabion erection commences by first making the position. The mesh is laid on the ground and formed into a box. The height is fixed to be three feet and the width three feet. The length depends on the how far the benching is to done. Hardcore is then laid inside the basket formed. It is done by hand packing until it is full. After filling with hardcore, the top is then secured with binding wire. Hand packing of hardcore is done to allow voids to be formed. This ensures water is not retained by the gabion.
After the gabion is formed, soil is then moved up to the top. The garden is leveled and compacted. Landscaping with vegetation is then planted. Soil is poured on top of the gabion to allow for creepers to camouflage it. Steps are then built at different intervals for walking up or down the gardens. The mesh gabion may be made to meander so that the garden gets good curves. Additional vegetation of trees may be planted on the lower side of the gabion mesh. This trees or shrubs give wind breaking actions over the sloped gardens.
Andrew Karundu Is A Building Economist, Providing Home Based Solutions To Fixing, Repairing, Remodeling And Redesigning Homes. He Uses Simple Tried And Tested Methods To Improve Family Lifestyles.Visit His Site Here For Adequate Information On Most HOME IMPROVEMENT SOLUTIONS.
Possibly Related Posts:






More Options ...
Categories
Tag Cloud
Blog RSS
Comments RSS



Void « Default
Life
Earth
Wind
Water
Fire
Light 
very nice article
your articles are very pratical